Dell C3765dnf Color Laser View - Page 410
Setting the Printer Driver, Dell ColorTrack Mode, Specify Group Name
View all Dell C3765dnf Color Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 410 highlights
b Enter the IP address of your printer in the web browser. See "Dell™ Printer Configuration Web Tool." 2 Select Print Server Settings. 3 Click the Security tab. 4 Select LDAP Authentication. LDAP Authentication (for ColorTrack Pro): • Confirm the authentication method. • When adding a text string to the UserID, select Enable for Use Added Text String. • When Enable is selected for Use Added Text String, enter the additional text string in Text String Added to User Name. 5 Click Apply New settings. 6 Turn off the printer, and turn it on again to apply the settings. Authentication Method Displays the current LDAP authentication method. Direct Authentication executes server authentication with the UserID and password entered. Use Added Text String Specify whether to add a text string to the UserID. The change becomes effective after the printer is turned off and then on again. Text String Added to User Name When using an added string for the user name, specify the text string to be added. For example: if the user name is "[email protected]", normally you must enter "[email protected]". However if Use Added Text String is set to Enable, and "@myhost.example.com" is specified in Text String Added to User Name, only the data "abcde" must be entered with the printer driver, thus simplifying the entry task. The change becomes effective after the printer is turned off and then on again. Setting the Printer Driver To print using ColorTrack, set the printer driver. Once set, the settings of the printer driver are enabled until they are changed. 1 Open Properties of the printer driver. 2 Configure the following settings from the Configuration tab. Dell ColorTrack Mode Specify whether to allow general users to change settings related to authentication or whether general users must use the settings configured by the Administrator. Specify Group Name Specify the name of the belonging group to use when authenticating. If you specify a group that does not belong, authentication fails and the data is not printed. Also, the default group is set if Specify Group Name is not specified. 408 Printing Using ColorTrack (External Authentication)