Dell C3765dnf Color Laser View - Page 221

2 Sided Printing On Off Remote Receive On Off Remote Receive Tone Discard Size Available Range: 00-99 Off On Auto Reduction Redial Attempts Available Range: 0-13 Interval of Redial Available Range: 1-15 minutes Resend Delay Available Range: 3-255 seconds Tone / Pulse Prefix Dial Prefix Dial Number Tone Pulse (10PPS) Pulse (20PPS) On Off Fax Cover Page On Off Fax Header*1 On Off ECM On Off Modem Speed 2.4 kbps 4.8 kbps 9.6 kbps 14.4 kbps 33.6 kbps Display Manual Fax On Recipients Off Fax Activity Auto Print No Auto Print Prints the received fax on both sides of a sheet of paper. Does not print the received fax on both sides of a sheet of paper. Receives a fax by pressing a remote receive code on the external telephone after picking up the handset of the telephone. Does not receive a fax by pressing a remote receive code on the external telephone after picking up the handset of the telephone. Sets the tone to start Remote Receive. Prints any excess at the bottom of a fax page without discarding it. Discards any excess at the bottom of the page. Automatically reduces a fax page to fit it onto the appropriate sized paper. Sets the number of redial attempts to make when the destination fax number is busy, within the range of 0 to 13. Sets the interval between redial attempts within the range of 1 to 15 minutes. Sets the interval between transmission attempts within the range of 3 to 255 seconds. Sets the dialing type to Tone. Sets the dialing type to Pulse (10PPS). Sets the dialing type to Pulse (20PPS). Sets a prefix dial number. Does not set a prefix dial number. Sets a prefix dial number of up to five digits. This number dials before any auto dial number is started. Attaches a cover page to faxes. Does not attach a cover page to faxes. Prints the information of the sender on the header of faxes. Does not print the information of the sender on the header of faxes. Enables the ECM (Error Correction Mode). To use the ECM, the remote machines must also support the ECM. Disables the ECM. Allows you to adjust the fax modem speed when a fax transmission or reception error occurs. Displays the fax number when manually sending a fax. Does not display the fax number when manually sending a fax. Automatically prints a fax activity report after every 50 incoming and outgoing fax communications. Does not print a fax activity report automatically. Understanding the Tool Box Menus 219