Dell C3765dnf Color Laser View - Page 186

*1 This item is effective only when the optional hard disk is installed and is set to On for encryption. NOTE: If IPsec is enabled with incorrect settings, you must disable it using the IPsec menu on the operator panel. 802.1x Purpose: To specify the settings for IEEE 802.1x authentication for encrypted communication to the printer. Values: Configure 802.1x Enable IEEE 802.1x Select the check box to enable IEEE 802.1x authentication. Authentication Method EAP-MD5 EAP-MSCHAPv2 Selects the authentication method to use for IEEE 802.1x authentication. PEAP/MSCHAPv2 EAP-TLS*1, 2 Login Name: (Device Sets the login name (device name) for IEEE 802.1x authentication using Name) up to 128 alphanumeric characters. Password Sets the login password for IEEE 802.1x authentication using up to 128 alphanumeric characters. Re-enter Password Confirms the set login password. Certificate Validation Select the check box to enable Certificate Validation. *1 This item is displayed only when the optional hard disk is installed and is set to On for encryption. *2 When this item is selected, Password and Re-enter Password need not to be specified. IP Filter (IPv4) Purpose: To specify the IP address and subnet mask to be permitted or denied access to the printer. Values: Access List Address Address Mask Active Mode Sets the IP addresses that are permitted or denied access to the printer. Enter a numeric value between 0 and 255 in each field. Sets the subnet mask that are permitted or denied access to the printer. Enter a numeric value between 0 and 255 in each field. Reject Rejects printing from specified network address. Accept Permits printing from specified network address. Off Disables the IP Filter feature for the specified IP address. SMTP Domain Filtering Purpose: To specify whether to restrict sending e-mails to specific domains only. NOTE: This feature does not restrict sending e-mails through the E-Mail Alert feature. Values: 184 Dell™ Printer Configuration Web Tool