Dell C3765dnf Color Laser View - Page 241

Purpose: To disable IEEE 802.1x authentication. The change becomes effective after the printer is turned off and then on again. Adobe Protocol Purpose: To specify PostScript communication protocol for a parallel interface, you can configure the Adobe Protocol settings for the wired network. The change becomes effective after the printer is turned off and then on again. Values: Auto* Standard BCP TBCP Binary Used when auto-detecting the PostScript communication protocol. Used when the communication protocol is in ASCII interface. Used when the communication protocol is in binary format. Used when the communication protocol supports both ASCII and binary data to switch between them according to the specified control code. Used when no special processing is required for data. Reset LAN Purpose: To initialize wired network data stored in non-volatile memory (NVM). After executing this function and rebooting the printer, all wired network settings are reset to their default values. Fax Settings Use the Fax Settings menu to configure the basic fax settings. NOTE: Values marked by an asterisk (*) are the factory default menu settings. Fax Line Settings Purpose: To configure basic settings for the fax line. Fax Number Purpose: To set the fax number of the printer, which will be printed on the header of a fax message. NOTE: Ensure to specify Fax Number before using Junk Fax Setup. Country Purpose: To select the country where the printer is used. Values: Algeria Australia Austria Belgium Hungary Iceland Ireland Italy Puerto Rico Romania Russia Saudi Arabia Understanding the Printer Menus 239