Dell C3765dnf Color Laser View - Page 160
Fax Defaults, Fax Settings, Binding of Original
View all Dell C3765dnf Color Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
Values: 2 Sided Copying Binding of Original 2-Up Margin Top/Bottom Margin Left/Right Margin Middle Sets whether to print on both sides of a sheet of paper. Sets the binding position for the 2-sided copying. Off* Does not perform multiple-up printing. Auto Automatically reduces the original pages to fit onto one sheet of paper. Manual Prints the original pages onto one sheet of paper in the size specified for Reduce/Enlarge. Sets the value of the top and bottom margins within the range of 0 mm (0.0 inch) to 50 mm (2.0 inch). Sets the value of the left and right margins within the range of 0 mm (0.0 inch) to 50 mm (2.0 inch). Sets the value of the middle margin within the range of 0 mm (0.0 inch) to 50 mm (2.0 inch). Fax Defaults Purpose: To create your own default Fax settings. NOTE: Values marked by an asterisk (*) are the factory default menu settings. Values: Resolution 2 Sided Scanning Binding of Original Darken/Lighten Delayed Send Standard* Suitable for documents with normal sized characters. Fine Suitable for documents containing small characters or thin lines or documents printed using a dot-matrix printer. Super Fine Suitable for documents containing extremely fine detail. The super fine mode is enabled only if the remote machine also supports the Super Fine resolution. Photo Suitable for documents containing photographic images. Sets whether to scan both sides of a document. Sets the binding position for the 2-sided scanning. Sets the default density to fax your documents lighter or darker. Sets the fax transmission start time when sending a fax at a specified time. Fax Settings Purpose: To configure the Fax settings. NOTE: You cannot set up the items on the Fax Settings page unless you set up the country code under Country. NOTE: Values marked by an asterisk (*) are the factory default menu settings. Values: Fax Number Country Fax Header Name Line Type Line Monitor Allows you to enter the fax number of the printer, which will be printed on the header of faxes. Sets the country where the printer is used. Allows you to enter a name that will be printed on the header of faxes. Sets the default line type; PSTN or PBX. Sets the volume of the line monitor, which audibly monitors a transmission through the internal speaker until a connection is made. 158 Dell™ Printer Configuration Web Tool