Dell C3765dnf Color Laser View - Page 435

Error-Code 016-542 016-543 016-720 016-756 016-757 016-758 016-759 016-764 016-765 016-766 016-767 016-768 016-786 016-790 016-799 016-930 016-931 016-985 016-986 024-920 024-927 024-965 024-966 024-969 026-721 What you can do A server certificate error has occurred when acquiring the certificate with the operation of WPA-Enterprise or WPA2-Enterprise. This is a problem in the server certificate, such as the validity period has expired for the server certificate being used with the Radius server. Ask your system administrator to confirm the server certificate being used with the Radius server. A wireless certificate (server or client) corruption error has occurred while using the Wireless LAN WPA-Enterprise or WPA2-Enterprise. Ask your system administrator to connect the printer with a wired network, initialize the wireless settings, import the wireless certificate, and set WPA-Enterprise or WPA2-Enterprise again. Error relating to PDL emulation problems has occurred. Change the Print Mode setting in the Graphics tab of the printer driver. Contact customer support if this failure is repeated. Printing in the prohibited time. Contact your system administrator. The account is not registered. Contact your system administrator. The function cannot be used. Contact your system administrator. Printable page limit is exceeded. Contact your system administrator. An error occurs when the printer connected to the SMTP server. Select Close, or wait for 60 seconds for the printer to recover. Check the SMTP server settings or contact the SMTP server administrator. The capacity of the SMTP server is not enough. Select Close, or wait for 60 seconds for the printer to recover. Contact the SMTP server administrator. The e-mail exceeds the SMTP server size restriction. Select Close, or wait for 60 seconds for the printer to recover. Contact the SMTP server administrator. The e-mail address of the recipient is incorrect. Select Close, or wait for 60 seconds for the printer to recover. Check e-mail address, and try scanning again. The e-mail address of the sender is incorrect. Select Close, or wait for 60 seconds for the printer to recover. Check e-mail address, and try scanning again. A timeout error occurs when sending or receiving scanned data. Select Close, or wait for 60 seconds for the printer to recover. Check if the Ethernet cable is connected properly. If there is no problem with the Ethernet cable, contact server administrator. Network connection error. (IP address is not determined.) Select Close, or wait for 60 seconds for the printer to recover. Check if the Ethernet cable is connected properly. If there is no problem with the Ethernet cable, contact server administrator. Select Close to clear the message and cancel the current print job. Confirm the configuration of the printer on the printer driver. The device is not supported. Remove it from the front USB port. The USB hub is not supported. Remove it from the front USB port. Select Close, or wait for 60 seconds for the printer to recover. Retry scanning by lowering the resolution setting or changing the file format of the scanned image. Remove the paper from the output tray. Check the toner gauge on the touch panel for an empty toner cartridge. Remove the empty toner cartridge, and install a new cartridge. For more information about replacing the toner cartridge, see "Replacing the Toner Cartridges." Confirm that the size and type specified in the tray settings matches the size and type of paper loaded in the tray. Check your USB memory: • If the file size or the number of files exceeds the limit of your USB memory. • If your USB memory is write-protected. Understanding Printer Messages 433