Dell C3765dnf Color Laser View - Page 59
Dell Printer Configuration Web Tool, Advanced Configuration Tool
View all Dell C3765dnf Color Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
5 Select Advanced, and then select a connection method from WPS-PBC, WPS-PIN, Operator Panel, Ethernet Cable, or Dell Printer Configuration Web Tool. For Ethernet Cable: a Select Ethernet Cable, and then click Next. Follow the on-screen instructions to configure wireless settings, and then click Next. The Advanced Configuration Tool starts. b Select the printer, and then click Next. Wireless Network Settings screen appears. NOTE: If the printer is not listed, click Enter IP Address and enter the IP address of your printer, and then click OK. c Set the wireless network settings, and then click Next. IP Address Settings screen appears. NOTE: For details on each item, see "Assigning an IP Address." d Set the IP address settings of the printer, and then click Next. Confirm the settings screen appears. e Confirm the settings, and then click Apply. Complete configuration screen appears. f Click Next. For WPS-PBC, WPS-PIN, Operator Panel, and Dell Printer Configuration Web Tool, follow the on-screen instructions to configure wireless settings. To configure wireless settings without using the video instructions, see the following instructions. WPS-PIN The PIN code of WPS-PIN can only be configured from the operator panel. NOTE: WPS-PIN (Wi-Fi Protected Setup-Personal Identification Number) is a method to authenticate and register devices required for wireless configuration by entering PIN assignments to a printer and computer. This setting, performed through an access point, is available only when the access points of your wireless router supports WPS. 1 Press the (Information) button. 2 Select the Tools tab, and then select Admin Settings. 3 Select until Network appears, and then select Network. 4 Select until Wireless appears, and then select Wireless. 5 Select until WPS Setup appears, and then select WPS Setup. 6 Select PIN Code. 7 Write down the displayed 8-digit PIN code or select Print PIN Code. The PIN code is printed. 8 Select Start Configuration. 9 Ensure that the message Setting WPS is displayed, and enter the PIN code displayed on step 7 into the wireless LAN access point (Registrar). NOTE: For WPS operation on the wireless LAN access point, refer to the manual supplied with the wireless LAN access point. 10 When the WPS operation is successful and the printer is rebooted, wireless LAN connection setting is completed. Installing Optional Accessories 57