Dell C3765dnf Color Laser View - Page 367
Information, Tools, Fax Header, Modem Speed, Display Manual, Fax Recipients, Sending Fax, Fax Reports
View all Dell C3765dnf Color Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 367 highlights
Option Fax Header Fax Reports ECM Modem Speed Display Manual Fax Recipients Fax Activity Fax Transmit Fax Broadcast Fax Protocol Description Prints the sender's information on the header of faxes. Select Off to turn this feature off. Select On to turn this feature on. Note that if United States is selected for the setting of Country, this option does not appear on the menu. The setting is fixed to On and cannot be changed. For information on the country setting, see "Setting Your Country." You can set whether to enable or disable the ECM (Error Correction Mode). You can set the modem speed. You can set whether to display the fax number of the recipient on the Sending Fax screen when manually sending a fax. You can set whether to automatically print a fax activity report after every 50 incoming and outgoing fax communications. You can set whether to print a transmission result after a fax transmission. You can set whether to print a transmission result after a fax transmission to multiple locations. You can set whether to print the protocol monitor report after a fax transmission to monitor fax protocol problems. NOTE: Prefix Dial supports only the environment where you send a fax to the external line number. To use Prefix Dial, you must do the following from the operator panel. 1 Press the (Information) button. 2 Select the Tools tab, and then select Admin Settings. 3 Select until Fax Settings appears, and then select Fax Settings. 4 Select Fax Line Settings. 5 Select until Line Type appears, and then select Line Type. 6 Select PBX, and then OK. 7 Select . 8 Select Transmission Defaults. 9 Select until Prefix Dial appears, and then select Prefix Dial. 10 Select On. 11 Select the Prefix Dial Number box. 12 Enter a prefix number using the number pad, and then select OK. The characters you can use for a prefix number are 0-9, *, and #. The maximum number of characters for a prefix number is five. 13 Turn off the printer, and turn it on again to apply the settings. Faxing 365