Dell C3765dnf Color Laser View - Page 301

18 Loading Print Media Loading print media properly helps prevent jams and ensures trouble-free printing. Before loading any print media, identify the recommended print side of the print media. This information is usually indicated on the print media package. Capacity Tray1 and the optional 550-sheet feeder (tray2) can hold: • 550 sheets of the standard paper. The multipurpose feeder (MPF) can hold: • 150 sheets of the standard paper. Print Media Dimensions The maximum dimensions of print media that tray1 and the optional 550-sheet feeder can handle are: • Width - 148 mm (5.83 inches) to 215.9 mm (8.5 inches) • Length - 210 mm (8.27 inches) to 355.6 mm (14.00 inches) The maximum dimensions of print media that the MPF can handle are: • Width - 76.2 mm (3.00 inches) to 215.9 mm (8.5 inches) • Length - 127 mm (5.00 inches) to 355.6 mm (14.00 inches) Loading Print Media in Tray1 and the Optional 550-Sheet Feeder This section describes how to load letterhead. For details about loading print media other than letterhead, see "Loading Paper." NOTE: To avoid paper jams, do not remove the tray while printing is in progress. NOTE: Use only laser print media. Do not use ink jet paper in the printer. Loading Letterhead (Pre-Printed and Pre-Punched Paper) The pre-printed paper such as letterhead and pre-punched paper must be inserted bottom edge first with the print side facing down as shown below. NOTE: Set Letterhead 2-Sided or Letterhead Duplex Mode to Enable and Paper Type to Letterhead, Preprinted, or Prepunched from the operator panel or the printer driver even when you print on a single side of letterhead, pre-printed, or pre-punched paper. Loading Print Media 299