Dell C3765dnf Color Laser View - Page 439
Close, Tone/Pulse setting
View all Dell C3765dnf Color Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 439 highlights
Error-Code 034-515 034-791 035-701 035-708 035-717 035-718 035-720 035-781 042-700 075-910 077-300 077-301 077-302 091-911 091-914 091-917 091-918 091-919 091-921 091-922 091-923 What you can do Select Close, or wait for 60 seconds for the printer to recover. Try the following: • Try the same operation. • Check the printer or remote machine if the memory is full. Select Close, or wait for 60 seconds for the printer to recover. Check if the telephone line cord is connected properly. If the line connection is correct, check the following: • If Tone/Pulse setting is correct. For more information about Tone/Pulse setting, see "Tone / Pulse." If Tone/Pulse setting is correct, check the following: • If the remote machine can receive a fax. Select Close, or wait for 60 seconds for the printer to recover. Check the following: • Status of the remote machine • Tone/Pulse setting For more information about Tone/Pulse setting, see "Tone / Pulse." Select Close, or wait for 60 seconds for the printer to recover. Try the following: • Try the same operation. • Reduce the modem speed. For more information about modem speed, see "Modem Speed." Select Close, or wait for 60 seconds for the printer to recover. Reduce the modem speed. For more information about modem speed, see "Modem Speed." Select Close, or wait for 60 seconds for the printer to recover. Check the status of the remote machine. Select Close, or wait for 60 seconds for the printer to recover. Check the features of the remote machine. Select Close, or wait for 60 seconds for the printer to recover. Check if the remote machine is busy. Wait for a while until the printer cools down. Contact customer support if this failure is repeated. Make sure that the multipurpose feeder (MPF) is fully installed. Close the front cover. Close the right side cover. Close the rear cover. Remove the used waste toner box, and install a new toner box. For more information about replacing the waste toner box, see "Replacing the Waste Toner Box." Reinsert the black drum cartridge. If the message remains, replace the cartridge. For more information about reinserting the drum cartridge, see "Replacing the Drum Cartridges." Reinsert the yellow drum cartridge. If the message remains, replace the cartridge. For more information about reinserting the drum cartridge, see "Replacing the Drum Cartridges." Reinsert the magenta drum cartridge. If the message remains, replace the cartridge. For more information about reinserting the drum cartridge, see "Replacing the Drum Cartridges." Reinsert the cyan drum cartridge. If the message remains, replace the cartridge. For more information about reinserting the drum cartridge, see "Replacing the Drum Cartridges." Make sure that the black drum cartridge is fully installed. For more information about installing the drum cartridge, see "Replacing the Drum Cartridges." Make sure that the yellow drum cartridge is fully installed. For more information about installing the drum cartridge, see "Replacing the Drum Cartridges." Make sure that the magenta drum cartridge is fully installed. For more information about installing the drum cartridge, see "Replacing the Drum Cartridges." Understanding Printer Messages 437