Epson BrightLink 585Wi User Manual - Page 211
Solutions to Microphone Problems, Solving Projector or Remote Control Operation Problems
View all Epson BrightLink 585Wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 211 highlights
• If you are using a Mac and you do not hear sound from an HDMI source, make sure your Mac supports audio through the HDMI port. If not, you need to connect an audio cable. • If you want to use a connected audio source when the projector is off, set the Standby Mode option to Communication On and the A/V Output option to Always On. • Make sure the Audio Output option is set to the correct audio port for your video device. • If you turn the projector on immediately after turning it off, the cooling fans may run at high speed momentarily and cause an unexpected noise. This is normal. Parent topic: Solving Image or Sound Problems Solutions to Microphone Problems If there is no sound when you use a microphone connected to the projector, try the following solutions: • Make sure the microphone is securely connected to the projector. • Make sure you are using a dynamic microphone, not a condenser microphone. • Adjust the Mic Input Level setting as necessary in the projector's menus. • If you want to use the microphone when the projector is off, set the Standby Mode option to Communication On. Parent topic: Solving Image or Sound Problems Related references Projector Setup Settings - Extended Menu Projector Feature Settings - Settings Menu Related tasks Connecting a Microphone Solving Projector or Remote Control Operation Problems Check the solutions in these sections if you have problems operating the projector or remote control. Solutions to Projector Power or Shut-Off Problems Solutions to Problems with the Remote Control Solutions to Password Problems Parent topic: Solving Problems 211