HP LaserJet Enterprise MFP M630 LaserJet Analog Fax Accessory 500 - Fax Guide - Page 92

Set fax send speed, Set the redial interval, Redial-on-Busy, Redial, on-No-Answer, Redial-on-Error

Page 92 highlights

1. From the Home screen, scroll to and touch the Administration button. 2. Open the following menus: ● Fax Settings ● Fax Send Settings ● Fax Send Setup ● Fax Dialing Settings 3. Touch the Dialing Mode drop down menu and select either the Tone option (default) or Pulse option to set the fax dialing mode. 4. Touch the Save button. Set fax send speed The Fax send speed setting sets the modem bit rate (measured in bits per second) of the Analog Fax modem while sending a fax. 1. From the Home screen, scroll to and touch the Administration button. 2. Open the following menus: ● Fax Settings ● Fax Send Settings ● Fax Send Setup ● Fax Dialing Settings 3. Touch the drop down menu under the Fax Send Speed heading and then touch one of the following: ● Fast (default) - 33600 bps (bits per second) ● Medium - 14400 bps ● Slow - 9600 bps 4. Touch the Save button. Set the redial interval The redial interval setting selects the number of minutes between retries if the number dialed is busy or not answering. Busy can also indicate a communication error. NOTE: You might observe a redial message on the control panel when the Redial-on-Busy, Redialon-No-Answer, and Redial-on-Error settings are set to off. This occurs when the fax accessory dials a number, establishes a connection, and then loses the connection. As a result of this error condition, the fax accessory performs two automatic redial attempts regardless of the redial settings (the first one at 26,400 bps and, if that fails, a second one at 14,400 bps). During this redial operation, a message appears on the control panel to indicate that a redial is in progress. 1. From the Home screen, scroll to and touch the Administration button. 2. Open the following menus: 80 Chapter 3 HP Color LaserJet CM 4540 MFP Series, HP Color LaserJet Enterprise M4555 MFP Series, HP LaserJet Enterprise 500 MFP Series, HP LaserJet Enterprise 500 Color MFP Series, and HP LaserJet Enterprise M725 MFP Series ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168

1.
From the Home screen, scroll to and touch the
Administration
button.
2.
Open the following menus:
Fax Settings
Fax Send Settings
Fax Send Setup
Fax Dialing Settings
3.
Touch the
Dialing Mode
drop down menu and select either the
Tone
option (default) or
Pulse
option to set the fax dialing mode.
4.
Touch the
Save
button.
Set fax send speed
The Fax send speed setting sets the modem bit rate (measured in bits per second) of the Analog Fax
modem while sending a fax.
1.
From the Home screen, scroll to and touch the
Administration
button.
2.
Open the following menus:
Fax Settings
Fax Send Settings
Fax Send Setup
Fax Dialing Settings
3.
Touch the drop down menu under the
Fax Send Speed
heading and then touch one of the
following:
Fast
(default) — 33600 bps (bits per second)
Medium
— 14400 bps
Slow
— 9600 bps
4.
Touch the
Save
button.
Set the redial interval
The redial interval setting selects the number of minutes between retries if the number dialed is busy
or not answering. Busy can also indicate a communication error.
NOTE:
You might observe a redial message on the control panel when the
Redial-on-Busy
,
Redial-
on-No-Answer
, and
Redial-on-Error
settings are set to off. This occurs when the fax accessory dials a
number, establishes a connection, and then loses the connection. As a result of this error condition,
the fax accessory performs two automatic redial attempts regardless of the redial settings (the first
one at 26,400 bps and, if that fails, a second one at 14,400 bps). During this redial operation, a
message appears on the control panel to indicate that a redial is in progress.
1.
From the Home screen, scroll to and touch the
Administration
button.
2.
Open the following menus:
80
Chapter 3
HP Color LaserJet CM 4540 MFP Series, HP Color LaserJet Enterprise M4555 MFP
Series, HP LaserJet Enterprise 500 MFP Series, HP LaserJet Enterprise 500 Color MFP Series,
and HP LaserJet Enterprise M725 MFP Series
ENWW