HP t505 Administrator Guide 7 - Page 149
root/Network/Wireless/IPv6Enable, root/Network/Wired/Security/Type
View all HP t505 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
Table E-16 root > Network (continued) Registry key Description root/Network/Wired/Method If set to Automatic, the thin client will use DHCP to attempt to retrieve network settings. If set to Static, the values of the IPAddress, SubnetMask, and DefaultGateway registry keys are used. HP does not recommend using Static in a generic ThinPro profile because it will cause all thin clients to receive the same IP address. root/Network/Wired/Security/CACert Sets the path to CA certificate file. root/Network/Wired/Security/EnableMachineAuth If set to 1, machine authentication for PEAP is enabled. root/Network/Wired/Security/Identity Sets the identity or anonymous identity. root/Network/Wired/Security/InnerAuth Sets the PEAP inner authentication protocol. root/Network/Wired/Security/InnerAuthTTLS Sets the TTLS inner authentication protocol. root/Network/Wired/Security/PEAPVersion Sets the PEAP version. root/Network/Wired/Security/Password Sets the password. root/Network/Wired/Security/PrivateKey Sets the path to a private key file. This is only used for TLS authentication. root/Network/Wired/Security/Type Sets the 802.1x authentication type. root/Network/Wired/Security/UserCert Sets the path to a user certificate file. This is only used for TLS authentication. root/Network/Wired/Security/Username Sets the username. root/Network/Wired/SubnetMask Sets the subnet mask of the device, such as 255.255.255.0 (for a standard class C subnet). This setting will only take effect when Method is set to Static. root/Network/Wireless/DefaultGateway Sets the default gateway the device will use to communicate with the Internet. Typically this is the IP address of the router. This setting will only take effect when Method is set to Static. root/Network/Wireless/EnableDefGatewayAsDNS If set to 1, the default gateway will also be the name server. root/Network/Wireless/IPAddress Sets the IPv4 address of the thin client. This setting will only take effect when Method is set to Static. root/Network/Wireless/IPv6Enable If set to 1, IPv6 is enabled. root/Network/Wireless/Interface Sets the default wireless interface or wireless network adapter. root/Network/Wireless/Method If set to Automatic, the thin client will use DHCP to attempt to retrieve network settings. If set to Static, the values of the IPAddress, SubnetMask, and DefaultGateway registry keys are used. HP does not recommend using Static in a generic ThinPro profile because it will cause all thin clients to receive the same IP address. root/Network/Wireless/PowerEnable If set to 1, power management of the wireless network card is enabled. root/Network/Wireless/SSID Sets the wireless access point to use via its SSID. root/Network/Wireless/SSIDHidden Specifies if the SSID of the wireless access point is hidden. root/Network/Wireless/SSIDWhiteList Specifies a whitelist for wireless access points. If this registry key's value is not empty, only the SSIDs specified in the value will root > Network 137