IBM 8862 Hardware Maintenance Manual - Page 30
connectors
UPC - 000435172679
View all IBM 8862 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
DIMM LEDs power. After ac power has been removed from the server, power remains available to these LEDs for up to 12 hours. After 12 hours, you must reinstall the microprocessor tray and turn on the server to supply power to the LEDs. To reinstall the microprocessor tray, reverse the preceding steps. Complete the following steps to view the DIMM LEDs: Note: The lit LEDs light the connector retaining clips; look for a lit retaining clip to locate a failed DIMM. 1. Turn off the server and all peripheral devices. 2. Slide the server out of the rack cabinet. 3. Open the top cover. a. The following illustration shows the internal connectors and LEDs on the 8-DIMM-connector memory board in the memory cassette. DIMM 4 error LED DIMM 3 error LED DIMM 2 error LED DIMM 1 error LED DIMM 5 error LED DIMM 6 error LED DIMM 7 error LED DIMM 8 error LED DIMM connector 1 DIMM connector 2 DIMM connector 3 DIMM connector 4 DIMM connector 8 DIMM connector 7 DIMM connector 6 DIMM connector 5 20 IBM xSeries 365 Types 8861, 8862: Hardware Maintenance Manual and Troubleshooting Guide