Kyocera FS-1128MFP Service Manual - Page 15

2JN 1-1 Specifications 1-1-1 Specifications Type Desktop Printing method Electrophotography by semiconductor laser, single drum system Originals Sheet, Book, 3-dimensional objects (maximum original size: Folio/Legal) Original feed system Contact glass: fixed Document processor (optional): sheet-through Paper weight Cassette: 60 to 120 g/m2 (Duplex: 60 to 120 g/m2) MP tray: 60 to 220 g/m2, 230 µm (Cardstock) Paper type Cassette: Plain, Rough, Recycled, Preprinted, Bond, Color (Colour), Prepunched, Letterhead, High Quality, Custom 1 to 8 (Duplex: Same as simplex) MP tray: Plain, Transparency, Rough, Vellum, Labels, Recycled, Preprinted, Bond, Cardstock, Color (Colour), Prepunched, Letterhead, Thick, Envelope, High Quality, Custom 1 to 8 Paper size Cassette: Maximum: 8 1/2 × 14"/A4 (Duplex: 8 1/2 × 14"/A4) Minimum: 5 1/2 × 8 1/2"/A6 (Duplex: 7 1/4 × 10 1/2"/A5) MP tray: Maximum: 8 1/2 × 14"/A4 Minimum: 3 5/8 × 6 1/2"/C5 Magnification ratios Manual mode: 25 - 400%, 1% increments Printing speed (Simplex A4: 28 ppm Letter: 30 ppm Legal: 24 ppm B5R: 22 ppm A5R: 17 ppm A6R: 17 ppm First print time (A4, feed from cassette) . When using the document processor: 7.9 ±0.5 seconds When the document processor is not used: 6.9 ±0.5 seconds Warm-up time (22 °C/71.6 °F, 60%RH) . Power on: 20 seconds Recovery from the low power mode: 15 seconds or less Recovery from the sleep mode: 15 seconds or less Paper capacity Cassette: 250 sheets (80 g/m2) MP tray: 50 sheet (80 g/m2, plain paper, Letter/A4 or smaller) Output tray capacity 150 sheets (80 g/m2) Continuous printing 1 to 999 sheets Photoconductor OPC drum (diameter 30 mm) Image write system Semiconductor laser (1 beam) Charging system Scorotron (positive charging) Developing system Mono component dry developing method Toner replenishing: Automatic from the toner container Transfer system Transfer roller (negative-charged) Separation system Small diameter separation, discharger brush Cleaning system Drum: Counter blade Charge erasing system Exposure by eraser lamp (LED) Fixing system Heat roller system CPU PowerPC440/667MHz Memory Standard: 256 MB Maximum: 768 MB Resolution 600 × 600 dpi Operating environment Temperature: 10 to 32.5 °C/50 to 90.5 °F Humidity: 15 to 80% Altitude: 2,500 m/8,202 ft maximum Brightness: 1,500 lux maximum Dimensions (W × H × D 494 × 430 × 448 mm 19 7/16 ×16 15/16 ×17 11/16" Weight Approx. 18 kg/40 lbs Floor requirements (W × D 640 × 646 mm 25 3/16 × 25 7/16" 1-1-1