Kyocera FS-1128MFP Service Manual - Page 45

2JN Maintenance item No. Description U063 Adjusting the shading position Description Changes the shading position of the scanner. Purpose Used when white lines continue to appear longitudinally on the image after the shading plate is cleaned. This is due to flaws or stains inside the shading plate. To prevent this problem, the shading position should be changed so that shading is possible without being affected by the flaws or stains. Method 1. Press the start key. 2. Change the setting using the cursor left/right keys or numeric keys. Description Setting range Initial setting Change in value per step Shading position -32 to 20 0 0.086 mm Increasing the setting moves the shading position toward the machine left, and decreasing it moves the position toward the machine right. 3. Press the start key. The value is set. Supplement While this maintenance item is being executed, copying from an original is available in interrupt copying mode (which is activated by pressing the system menu/counter key). Completion Press the stop key. The screen for selecting a maintenance item No. is displayed. 1-3-17