Kyocera FS-1128MFP Service Manual - Page 59
Setting: ON TIMEsec, Select [DRUM REFRESH]. - developer unit
View all Kyocera FS-1128MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
2JN-2 Maintenance item No. Description U113 Performing drum refresh operation Description Sets the drum refresh operation. Purpose To operate when a faulty image (black line, etc.) occurs. Method 1. Press the start key. Display Description DRUM REFRESH Setting the drum refresh operation ON/OFF ON TIME(sec) Setting the drum refresh operation time 2. Select [DRUM REFRESH]. 3. Select [ON] using the cursor left/right keys. 4. Press the start key. The setting is set. 5. Turn the main power switch off and on. Setting range 1 (ON) / 0 (OFF) 0 to 255 (s) Initial setting 0 0 Setting: ON TIME(sec) 1. Select [ON TIME(sec)] using the cursor up/down keys. 2. Change the setting value using the cursor left/right keys. 3. Press the start key. The value is set. 4. Turn the main power switch off and on. U130 Initial setting for the developing unit Description Replenishes toner to the developing unit to a certain level from the toner container that has been installed. Purpose To operate when installing the machine or replacing the developing unit. Also to operate during maintenance service (replacing the maintenance kit). (See page 2-4-4, page 1-5-29 and page 1-5-30) Method 1. Press the start key. 2. Select [INST MODE] using the cursor up/down keys and press the start key. Display TIME(SEC) INST MODE Description Execution time Setting the toner installation ON/OFF 3. Select [ON] using the cursor left/right keys. 4. Press the start key. 5. Turn the main power switch off and on. Toner installation is started. Completion Press the stop key after initial setting is complete. The screen for selecting a maintenance item No. is displayed. 1-3-31