Kyocera FS-1128MFP Service Manual - Page 65

2JN-1 Maintenance item No. Description U252 Setting the destination Description Switches the operations and screens of the machine according to the destination. Purpose To be executed after initializing the backup RAM, in order to return the setting to the value before replacement or initialization. Setting 1. Press the start key. 2. Select the destination using the cursor up/down keys. Display Description INCH Inch (North America) specifications EUROPE METRIC Metric (Europe) specifications ASIA PACIFIC Metric (Asia Pacific) specifications AUSTRALIA Australia specifications CHINA China specifications 3. Press the start key. The setting is set. 4. After turning the main power switch off, wait a while and turn it on. (If fax is not detected, try turning the main power switch on and off again.) Supplement The specified initial settings are provided according to the destinations in the maintenance items below. To change the initial settings in those items, be sure to run maintenance item U021 after changing the destination. Initial setting according to the destinations Maintenance Title item No. Japan Inch Europe Metric, Asia Pacific 253 Switching between double and single Single Double Double counts U253 Switching between double and single counts Description Switches the count system for the total counter and other counters. Purpose Used to select, according to the preference of the user (copy service provider), if folio size paper is to be counted as one sheet (single count) or two sheets (double count). Setting 1. Press the start key. 2. Select the count system using the cursor up/down keys. Display Description SGL COUNT(ALL) Single count for all size paper DBL COUNT(FOLIO) Double count for Folio size or larger Initial setting: DBL COUNT(FOLIO) 3. Press the start key. The setting is set. Completion Press the stop key. The screen for selecting a maintenance item No. is displayed. 1-3-37