Kyocera FS-1128MFP Service Manual - Page 47

2JN Maintenance item No. Description U066 Adjusting the scanner leading edge registration Description Adjusts the scanner leading edge registration of the original scanning. Purpose Make the adjustment if there is a regular error between the leading edges of the copy image and original. Adjustment 1. Press the start key. 2. Select the item to be adjusted using the cursor up/down keys. Display Description Setting range Initial Change in setting value per step FRONT Scanner leading edge registration -45 to 45 0 0.086 mm TAIL Scanner leading edge registration -45 to 45 0 (rotate copying) 0.086 mm 3. Press the system menu/counter key. 4. Place an original and press the start key to make a test copy. 5. Press the system menu/counter key. 6. Change the setting value using the cursor left/right keys or numeric keys. For copy example 1, increase the value. For copy example 2, decrease the value. Scanner leading edge registration Original Copy example 1 7. Press the start key. The value is set. Figure 1-3-7 Copy example 2 Caution Check the copy image after the adjustment. If the image is still incorrect, perform the following adjustments in maintenance mode. U066 U403 (P.1-3-42) U071 (P.1-3-23) U404 (P.1-3-43) Completion Press the stop key. The screen for selecting a maintenance item No. is displayed. 1-3-19