Kyocera FS-1128MFP Service Manual - Page 77
Initial setting: DTMF, 120 V/1 220-240 V - processing unit
View all Kyocera FS-1128MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
2JN Maintenance item No. Description U603 Setting user data 1 Description Makes user settings to enable the use of the machine as a fax. Purpose To be run after installation of the facsimile kit if necessary. Method 1. Press the start key. 2. Select [LINE TYPE]. The current setting is displayed in reverse. 3. Select the setting using the cursor up/down keys. Display Description DTMF DTMF 10PPS 10 PPS 20PPS 20 PPS Initial setting: DTMF 4. Press the start key. The value is set. Completion Press the stop key. The screen for selecting a maintenance item No. is displayed. U604 Setting user data 2 Description Makes user settings to enable the use of the machine as a fax. Purpose Use this if the user wishes to adjust the number of rings that occur before the unit switches into fax receiving mode when fax/telephone auto-select is enabled. Method 1. Press the start key. The current setting is displayed. 2. Select [RINGS(F/P)#]. 3. Change the setting using the cursor left/right keys or numeric keys. Description Setting range Initial setting Number of fax/telephone rings 0 to 15 2 (120 V)/1 (220-240 V) If you set this to 0, the unit will start fax reception without any ringing. 4. Press the start key. The value is set. Completion Press the stop key. The screen for selecting a maintenance item No. is displayed. U605 Clearing data Description Initializes data related to the fax transmission such as transmission history. Purpose To clear the transmission history. Method 1. Press the start key. 2. Select [CLEAR COM.REC.]. 3. Press the start key. Initialization processing starts. When processing is finished, the screen for selecting a maintenance item No. is displayed. Completion Press the stop key. The screen for selecting a maintenance item No. is displayed. 1-3-49