Kyocera FS-1128MFP Service Manual - Page 60
On / 0 Off, Step2 Rate
View all Kyocera FS-1128MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
2JN-2 Maintenance item No. Description U144 Setting toner loading operation Description Sets toner loading operation after completion of copying. Toner is forcibly evacuated in case the average printing ratio for the number of printed pages assigned by [PAGE] is lower than the ratio defined by [RATIO]. Purpose To set whether or not toner is loaded on the drum after low density copying. Normally no change is necessary from the initial setting. Setting 1. Press the start key. 2. Select the item to be set using the cursor up/down keys. 3. Change the setting using the cursor left/right keys. Display T7 MODE STEP1 PAGE STEP2 PAGE STEP3 PAGE STEP1 RATE STEP2 RATE STEP3 RATE Description Toner loading operation Number of pages set (step1) Number of pages set (step2) Number of pages set (step3) Printing ratio (step1) Printing ratio (step2) Printing ratio (step3) Setting range Initial setting 1 (ON) / 0 (OFF) 1 0 to 50 3 0 to 50 8 0 to 50 20 0 to 100 1 0 to 100 2 0 to 100 3 4. Press the start key. The value is set. 5. Turn the main power switch off and on. U157 Checking the developing drive time Description Displays the developing drive time for checking. Purpose To check the developing drive time after replacing the developing unit. Method 1. Press the start key. The developing drive time is displayed in minutes. Display Description TIME(min) Developing drive time Completion Press the stop key. The screen for selecting a maintenance item No. is displayed. 1-3-32