Kyocera FS-1128MFP Service Manual - Page 61

2JN-2 Maintenance item No. Description U161 Setting the fuser control temperature Description Changes the fuser control temperature. Purpose Normally no change is necessary. However, can be used to prevent curling or creasing of paper, or solve a fuser problem on thick paper. Method 1. Press the start key. 2. Select the item to be set using the cursor up/down keys. 3. Change the setting using the cursor left/right keys or numeric keys. Display Description Setting range Initial setting 1ST TEMP T1 Stabilized temperature during operation T1 -30 to 30 0 2ND TEMP T2 Stabilized temperature under suspension T2 -30 to 30 0 2ND TEMP T2-2 Stabilized temperature under suspension T2-2 -30 to 30 0 1ST FEED TEMP Primary paper feed start temperature -30 to 30 0 2ND FEED TEMP Secondary paper feed start tempera -30 to 30 0 PRINT TEMP T3 Temperature control during printing T3 -30 to 30 0 PRINT TEMP T4 Temperature control during printing T4 -30 to 30 0 4. Press the start key. The value is set. 5. Turn the main power switch off and on. U199 U200 Checking the fuser temperature Description Displays the fuser temperature, the ambient temperature. Purpose To check the fuser temperature, the ambient temperature. Method 1. Press the start key. The fuser temperature and ambient temperature are displayed in centigrade (°C). Display Description HEAT TEMP Fuser temperature (°C) SURROUND TEMP Ambient temperature (°C) Completion Press the stop key. The screen for selecting a maintenance item No. is displayed. Turning all LEDs on Description Turns all the LEDs on the operation panel on. Purpose To check if all the LEDs on the operation panel light. Method 1. Press the start key. 2. Select [EXECUTE] and press the start key. All the LEDs on the operation panel light. 3. Press the stop key. The LEDs turns off. Completion Press the stop key. The screen for selecting a maintenance item No. is displayed. 1-3-33