Kyocera FS-1128MFP Service Manual - Page 42

2JN Maintenance item No. Description U034 Adjustment: Center line adjustment 1. Select the item to be adjusted using the cursor up/down keys. Display Description Setting range Initial Change in setting value per step LEFT Adjustment of reference value 0 to 1180 235 MP TRAY Paper feed from MP tray* -70 to 70 0 CASSETTE 1 Paper feed from cassette 1* -70 to 70 0 CASSETTE 2 Paper feed from optional cassette 2* -70 to 70 0 CASSETTE 3 Paper feed from optional cassette 3* -70 to 70 0 DUPLEX Duplex mode (second side)* -70 to 70 0 0.04 mm 0.04 mm 0.04 mm 0.04 mm 0.04 mm 0.04 mm *: Setting the difference value from reference value 2. Press the system menu/counter key. 3. Press the start key to output a test pattern. 4. Press the system menu/counter key. 5. Change the setting value using the cursor left/right keys or numeric keys. For output example 1, decrease the value. For output example 2, increase the value. Center line of printing Correct image Output example 1 Output example 2 6. Press the start key. The value is set. Figure 1-3-2 Caution Check the copy image after the adjustment. If the image is still incorrect, perform the following adjustments in maintenance mode. U034 U067 (P.1-3-20) U072 (P.1-3-25) Completion Press the stop key. The screen for selecting a maintenance item No. is displayed. 1-3-14