Kyocera FS-1128MFP Service Manual - Page 38

Initializing counters and mode settings, Description, Purpose, Method, Error codes, Maintenance

Page 38 highlights

2JN Maintenance item No. Description U021 Initializing counters and mode settings Description Initializes all settings, except those pertinent to the type of machine, namely each counter, service call history and mode setting. Also initializes backup RAM according to region specification selected in maintenance item U252 Setting the destination. Refer to *1 of the maintenance mode item list about the item initialized. Purpose To return the machine settings to their factory default. Method 1. Press the start key. 2. Select [EXECUTE] using the cursor up/down keys. 3. Press the start key. All data other than that for adjustments due to variations between machines is initial- ized based on the destination setting. 4. Turn the main power switch off and on. An error code is displayed in case of an initialization error. When errors occurred, turn main power switch off then on, and execute initialization using maintenance item U021. Error codes Codes ERROR 01 ERROR 02 ERROR 03 ERROR 04 ERROR 05 ERROR 06 ERROR 07 ERROR 08 ERROR 09 ERROR 0a ERROR 0b ERROR 20 ERROR 40 Description Configuration initialization error Counter initialization error One-touch initialization error Panel program initialization error Event log initialization error Account initialization error Address book initialization error Department initialization error Document box initialization error Permissibility initialization error Job log initialization error Engine initialization error Scanner initialization error 1-3-10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252

2JN
1-3-10
U021
Initializing counters and mode settings
Description
Initializes all settings, except those pertinent to the type of machine, namely each counter, service call history
and mode setting. Also initializes backup RAM according to region specification selected in maintenance item
U252 Setting the destination.
Refer to *1 of the maintenance mode item list about the item initialized.
Purpose
To return the machine settings to their factory default.
Method
1.
Press the start key.
2.
Select [EXECUTE] using the cursor up/down keys.
3.
Press the start key. All data other than that for adjustments due to variations between machines is initial-
ized based on the destination setting.
4.
Turn the main power switch off and on.
An error code is displayed in case of an initialization error.
When errors occurred, turn main power switch off then on, and execute initialization using maintenance
item U021.
Error codes
Maintenance
item No.
Description
Codes
Description
ERROR 01
Configuration initialization error
ERROR 02
Counter initialization error
ERROR 03
One-touch initialization error
ERROR 04
Panel program initialization error
ERROR 05
Event log initialization error
ERROR 06
Account initialization error
ERROR 07
Address book initialization error
ERROR 08
Department initialization error
ERROR 09
Document box initialization error
ERROR 0a
Permissibility initialization error
ERROR 0b
Job log initialization error
ERROR 20
Engine initialization error
ERROR 40
Scanner initialization error