Kyocera FS-1128MFP Service Manual - Page 28
Installing the expansion memory (option), <Procedure>,
View all Kyocera FS-1128MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
2JN 1-2-3 Installing the expansion memory (option) 1. Turn off the main power switch. Caution: Do not insert or remove expansion memory while machine power is on. Doing so may cause damage to the machine and the expansion memory. 2. Remove the right side cover. 3. Remove the screw. 4. Open the memory slot cover. 5. Insert the expansion memory into the mem- ory socket so that the notches on the memory align with the corresponding protrusions in the slot. 6. Close the memory slot cover. 7. Secure the screw. 8. Refit the right side cover. 9. Print a status page to check the memory expansion. If memory expansion has been properly performed, information on the installed memory is printed with the total memory capacity has been increased. Standard memory capacity 256 MB. 1-2-6 Screw Figure 1-2-8 Right side cover Memory slot cover 1 Memory socket Expansion memory 2 Figure 1-2-9