Kyocera FS-1128MFP Service Manual - Page 82

2JN Maintenance item No. Description U630 Setting communication control 1 Description Makes settings for fax transmission regarding the communication. Start 1. Press the start key. 3. Select the item to be set using the cursor up/down keys. Display Description TX SPEED Sets the communication starting speed. RX SPEED Sets the reception speed. TX ECHO Sets the waiting period to prevent echo problems at the sender. RX ECHO Sets the waiting period to prevent echo problems at the receiver. Setting the communication starting speed Sets the initial communication speed when starting transmission. When the destination unit has V.34 capability, V.34 is selected for transmission, regardless of this setting. 1. Select the setting using the cursor up/down keys. Display Description 14400bps/V17 V.17, 14400 bps 9600bps/V29 V.17, 9600 bps 4800bps/V27ter V.27ter, 4800 bps 2400bps/V27ter V.27ter, 2400 bps Initial setting: 14400bps/V17 2. Press the start key. The setting is set. Setting the reception speed Sets the reception speed that the sender is informed of using the DIS or NSF signal. When the destination unit has V.34 capability, V.34 is selected, regardless of the setting. 1. Select the setting using the cursor up/down keys. Display Description 14400bps V.17, V.33, V.29, V.27ter 9600bps V.29, V.27ter 4800bps V.27ter 2400bps V.27ter (fallback only) Initial setting: 14400bps 2. Press the start key. The setting is set. Setting the waiting period to prevent echo problems at the sender Sets the period before a DCS signal is sent after a DIS signal is received. Used when problems occur due to echoes at the sender. 1. Select the setting using the cursor up/down keys. Display Description 500 Sends a DCS 500 ms after receiving a DIS. 300 Sends a DCS 300 ms after receiving a DIS. Initial setting: 300 2. Press the start key. The setting is set. 1-3-54