Kyocera FS-1128MFP Service Manual - Page 53
value per step,
View all Kyocera FS-1128MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
2JN Maintenance item No. Description U072 Adjusting the DP center line Description Adjusts the scanning start position for the DP original. Purpose Make the adjustment if there is a regular error between the centers of the original and the copy image when the DP is used. Adjustment 1. Press the start key. 2. Select the item to be adjusted using the cursor up/down keys. Display Description Setting range Initial Change in setting value per step FRONT BACK ROTATE Center line (first page) Center line (second page) Center line (rotate copying) -39 to 39 0 -39 to 39 0 -39 to 39 0 0.085 mm 0.085 mm 0.085 mm 3. Press the system menu/counter key. 4. Place an original on the DP and press the start key to make a test copy. 5. Press the system menu/counter key. 6. Change the setting value using the cursor left/right keys or numeric keys. For copy example 1, increase the value. For copy example 2, decrease the value. Reference Original Copy example 1 Copy example 2 Figure 1-3-12 7. Press the start key. The value is set. Caution Check the copy image after the adjustment. If the image is still incorrect, perform the following adjustments in maintenance mode. U072 U404 (P.1-3-43) Completion Press the stop key. The screen for selecting a maintenance item No. is displayed. 1-3-25