Kyocera FS-1128MFP Service Manual - Page 88
Setting the Tb1 time-out time, Ta/Tb1/Tb2 time-out time
View all Kyocera FS-1128MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
2JN Maintenance item No. Description U641 (cont.) Setting the Ta time-out time In the fax/telephone auto select mode, sets the time to continue ringing an operator through the connected telephone after receiving a call as a fax machine (see figure 1-3-1). A fax signal is received within the Ta set time, or the fax mode is selected automatically when the time elapses. In fax/telephone auto select mode, change the setting when fax reception is unsuccessful or a telephone fails to receive a call. 1. Change the setting using the cursor left/right keys. Description Setting range Initial setting Ta time-out time 1 to 255 30 2. Press the start key. The value is set. Ring detection Line connection as a fax machine Ring back tone send start Rings Start of fax reception Tb1 Ta Tb2 Figure 1-3-19 Ta/Tb1/Tb2 time-out time Setting the Tb1 time-out time In the fax/telephone auto select mode, sets the time to start sending the ring back tone after receiving a call as a fax machine (see figure 1-3-20). In fax/telephone auto select mode, change the setting when fax reception is unsuccessful or a telephone fails to receive a call. 1. Change the setting using the cursor left/right keys. Description Setting range Initial setting Change in value per step Tb1 time-out time 1 to 255 20 100 ms 2. Press the start key. The value is set. Setting the Tb2 time-out time In the fax/telephone auto select mode, sets the time to start ringing an operator through the connected telephone after receiving a call as a fax machine (see figure 1-3-19). In the fax/telephone auto select mode, change the setting when fax reception is unsuccessful or a telephone fails to receive a call. 1. Change the setting using the cursor left/right keys. Description Setting range Initial setting Change in value per step Tb2 time-out time 1 to 255 80 100 ms 2. Press the start key. The value is set. Setting the Tc time-out time In the TAD mode, set the time to check if there are any triggers for shifting to fax reception after a connected telephone receives a call. Only the telephone function is available if shifting is not made within the set Tc time. In the TAD mode, change the setting when fax reception is unsuccessful or a telephone fails to receive a call. 1. Change the setting using the cursor left/right keys. Description Setting range Initial setting Tc time-out time 1 to 255 s 60 2. Press the start key. The value is set. 1-3-60