Kyocera FS-1128MFP Service Manual - Page 80

2JN-2 Maintenance item No. Description U612 Setting system 3 Description Makes settings for fax transmission regarding operation and automatic printing of the protocol list. This determines how trailing edge margin is detected (to prevent image from being mutilated) while printing a received Fax. Start 1. Press the start key. 2. Select the item to be set using the cursor up/down keys. Display Description AUTO REDUCTION Selects if auto reduction in the auxiliary direction is to be performed. PROTOCOL LIST Sets the automatic printing of the protocol list. DETECT TRAIL Sets how trailing edge margins are detected Selecting if auto reduction in the auxiliary direction is to be performed Sets whether to receive a long document by automatically reducing it in the auxiliary direction or at 100% magnification. 1. Select the setting using the cursor left/right keys. Display Description ON Auto reduction is performed if the received document is longer than the fax paper. OFF Auto reduction is not performed. Initial setting: ON 2. Press the start key. The setting is set. Setting the automatic printing of the protocol list Sets if the protocol list is automatically printed out. 1. Select the setting using the cursor left/right keys. Display Description OFF The protocol list is not printed out automatically. ERROR The protocol list is automatically printed out after communication only if a communication error occurs. ON The protocol list is automatically printed out after communication. Initial setting: OFF 2. Press the start key. The setting is set. Setting how trailing edge margins are detected This determines whether trailing edge margin is detected (to prevent image from being mutilated) while printing a received Fax. 1. Select ON or OFF using the cursor left/right keys. Display Description ON Detects trailing edge margin OFF Does not detect trailing edge margin Initial setting: ON 2. Press the start key. The setting is set. Completion Press the stop key. The screen for selecting a maintenance item No. is displayed. 1-3-52