Kyocera FS-1128MFP Service Manual - Page 178
removed parts.
View all Kyocera FS-1128MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
2JN-1 24. Peel off the protective seal from the FFC tape D. 25. Align the line marking on the FFC with the rib on the ISU lower frame, then fix the FFC to the FFC tape D. 26. Install the ferrite core in the pit. 27. Peel off the released paper from the FFC tape A. 28. Stick the FFC on the FFC tape A. 29. Thread an end of the FFC through the ISU lower frame. 30. Refer to the step 11 to 1 and refit all the removed parts. NOTE: When the replacing the image scanner unit (ISU), perform following maintenance modes. 1. U425 Setting the target (see page 1-3-46) 2. U411 Adjusting the scanner automatically (see page 1-3-45) FFC Ferrite core Line FFC tape A Pit ISU lower frame FFC tape D FFC Line Ferrite core Pit Rib Figure 1-5-38 FFC Figure 1-5-39 ISU lower frame 1-5-26