Kyocera TASKalfa 4500i 3500i/4500i/5500i Operation Guide Rev-1 2011.4 - Page 181

Copying Functions Form Overlay Forms Original Density :30% Copy Density :100% Copy the original images onto the form. Once you scan and register the form, the form is overlaid onto the original. You can also use a form that is already registered in the machine's memory. NOTE: The optional Expansion Memory is required. To register a form in advance, refer to Form for Form Overlay on page 7-20 for details. 4 Follow the steps shown below for form overlay. Form Overlay Off Select Stored Form Scan New Form Original Zoom Paper : A4 : 100% : A4 Preview Status Add Shortcut Form Overlay - Select Form Document Box Box Name Form for Form Overlay Custom Box Status Copies Density (10 - 30, 100) % Cancel None Select Form OK 10/10/2010 10:10 Copies Up Detail 1/1 Preview Open Cancel OK 10/10/2010 10:10 1 Press the Copy key. 2 Press [Layout/Edit] and then [Form Overlay]. 3 Press [Scan New Form] to use the first page of originals as a form. NOTE: You can select the form density setting through 4 levels from 10%, 20%, 30% or 100%. Press the [+] or [-] buttons in Density. To use the forms already registered, press [Select Stored Form]. Press [Select Form] to display the document boxes that store documents which can be used as a form. Select the desired form from the list and press [OK]. NOTE: To return to a higher level folder, press [Up]. 4 Press [OK]. 5 Place the originals. Place the original for the form on top of the other originals. When using the optional document processor, the first page of the originals should be placed on the top. 6 Press the Start key to start copying. 4-23