Kyocera TASKalfa 4500i 3500i/4500i/5500i Operation Guide Rev-1 2011.4 - Page 319

Default Setting (System Menu) Collate/Offset Set the defaults for Collate/Offset. The table below shows the available settings. Collate Offset Item Off On Off Each Set (Each Page) Description Collate not performed. Collate performed. Offset not performed. Offset performed. (If [Off] is selected of Collate, it is performed [Each Page].) NOTE: Refer to page 3-14 for Collate/Offset. Use the procedure below to set the default Collate/Offset settings. 1 Press the System Menu key. 2 Press [Common Settings], [ ], [Next] of Function Defaults. Press [ ] twice and [Change] of Collate/Offset. 3 Select the defaults for Collate and Offset respectively. 4 Press [OK]. JPEG/TIFF Print 9 Select the image size (resolution) when printing JPEG or TIFF file. The table below shows the available settings. Item Fit to Paper Size Image Resolution Fit to Print Resolution Description Fit the image size to the selected paper size. Print at resolution of the actual image. Fit the image size to the print resolution. Use the procedure below to set the default JPEG/TIFF Print settings. 1 Press the System Menu key. 2 Press [Common Settings], [ ], [Next] of Function Defaults. Press [ ] twice and [Change] of JPEG/TIFF Print. 3 Select the default for [Fit to Paper Size], [Image Resolution], or [Fit to Print Resolution]. 4 Press [OK]. 9-25