Kyocera TASKalfa 4500i 3500i/4500i/5500i Operation Guide Rev-1 2011.4 - Page 310

Default Setting (System Menu) Orientation Confirmation Select whether to display a screen for selecting the orientation of the originals to be placed on the platen when using the following functions. (For more information, refer to page 4-9 for Original Orientation.) • Zoom (XY Zoom) • Duplex • Margin/Centering originals • Border erase • Combine mode • Memo mode • Page numbering • Booklets • Staple/Punch (optional feature) • 2-sided/Book Original • Text Stamp • Bates Stamp Use the procedure below to select the default Orientation Confirmation setting. 1 Press the System Menu key. 2 Press [Common Settings] and [Change] of Orientation Confirmation. 3 Select the default for [Off] or [On]. 4 Press [OK]. Function Defaults Defaults are the values automatically set after the warm-up is completed or the Reset key is pressed. Set the defaults for available settings such as copying and sending. Setting the frequently-used values as defaults makes subsequent jobs easier. IMPORTANT: If you want to enable the changed defaults immediately, move to the function screen and press the Reset key. Original Orientation Set the original orientation defaults. The available default settings are shown below. Item Top Edge on Top Top Edge on Left Description Select the original's top edge at the top. Select the original's top edge at the left. Refer to page 4-9 for Original Orientation. Use the procedure below to select the default orientation when originals are placed on the platen. 1 Press the System Menu key. 2 Press [Common Settings], [ ], [Next] of Function Defaults and then [Change] of Original Orientation. 3 Select [Top Edge on Top] or [Top Edge on Left] for the default. 4 Press [OK]. 9-16