Kyocera TASKalfa 4500i 3500i/4500i/5500i Operation Guide Rev-1 2011.4 - Page 207

Printing Banner printing When a document length from 470.1 mm (18.51") to a maximum of 1220.0 mm (48") is specified for printing, the print job is treated as long document printing. When you execute printing in this case, a message appears on the machine's operation panel. Place the paper in the multipurpose tray, continue to support it so that it does not fall, and press [Continue]. To cancel printing, press [Cancel]. NOTE: When KPDL is used for PDL Settings of the printer driver, a length setting of 470.5 mm (18.53") or longer is handled as long print. Job No.: Job Name: Use MP tray to print on the following paper. Set paper and press [Continue]. 210x800mm Custom 1 User Name: 5 Status Cancel Continue 10/10/2010 10:10 IMPORTANT: If an output tray that cannot be used for long document printing such as Mailbox (option) is selected in the printer driver, the output tray automatically changes to a tray that can be used. To print on paper that is 164 g/m2 or heavier, register the paper as a custom media type in the system menu, and select that type in Media Type in the printer driver before printing. (Refer to Specifying Paper Size and Media Type for the Multi Purpose Tray (MP Tray Setting) on page 2-41, and Media Type Setting on page 9-8. To print on multiple sheets, place each sheet after the previous sheet is printed, and press [Continue]. After pressing [Continue], support the paper with both hands so that it feeds in correctly. After printing starts, catch the paper when it is output so that it does not fall.When using the inner tray as the output location, do not stand up the stopper. Standing up the stopper may cause paper jams. 5-5