Sharp DX-C310FX DX-C310 DX-C3400 Operation Manual - Page 104

COPIER (9) Output display When one or more output functions such as sort, group, or staple sort have been selected, this shows the icons of the selected functions. ☞ OUTPUT (page 2-33) (10) Original feed display This appears when an original is inserted in the automatic document feeder. (11) Paper size display This shows the size of paper loaded in each tray. For the bypass tray, the paper type appears above the paper size. The selected tray is highlighted. The approximate amount of paper in each tray is indicated by . ☞ PAPER TRAYS (page 2-9) (12) Number of copies display This shows the number of copies set. The screen explained in this section appears when 500-sheet paper feed units and finisher are installed. The image will vary depending on the equipment installed. Tray during paper feeding Do not pull out a tray while paper is being fed from the tray. This will cause a paper misfeed. Identifying the tray that is being used to feed paper The tray being used to feed paper also appears in green in the paper size display in the base screen on the display. Base screen Paper size display Shows the tray being used to feed paper in green. 2-4 Contents