Sharp DX-C310FX DX-C310 DX-C3400 Operation Manual - Page 400

FACSIMILE AAA AAA CCC CCC EEE EEE GGG GGG III III (2) (3),(5) BBB BBB DDD DDD FFF FFF HHH HHH JJJ JJJ BACK OK 2 Enter the destination fax number. (1) Select the [Address] key in the base screen. For the [Address] key, see "BASE SCREEN OF FAX MODE" (page 4-8). (2) Select the one-touch key of the desired destination. If the destination is not stored in the address book, enter the fax number with the numeric keys. If the sub-address and passcode are stored in the one-touch key, the following sub-steps are not necessary. Go to step 3. (3) Select the [Sub Address] key. "/" appears. (4) Enter the sub-address with the numeric keys. (5) Select the [Sub Address] key. "/" appears. (6) Enter the passcode with the numeric keys. If a passcode has been omitted in the memory box of the other machine, (5) and (6) are not necessary. 3 Press the [BLACK & WHITE START] key. Your machine will call the other machine and initiate reception of the fax. • Polling multiple machines (serial polling) is not possible. • F-code polling reception can be used in combination with a timer setting. Only one polling reception operation with a timer setting can be stored at a time. ☞SENDING A FAX AT A SPECIFIED TIME (Timer) (page 4-74) To cancel polling... Set the [Polling] checkbox to in the screen of step 1. 4-107 Contents