Sharp DX-C310FX DX-C310 DX-C3400 Operation Manual - Page 659

SYSTEM SETTINGS WEB PAGE - FAX ( ADMINISTRATOR) Image Send Settings Settings related to the image send function (scan, Internet fax, etc.) can be configured. Fax Settings Select [System Settings] - [Image Send Settings] - [Fax Settings] in the menu bar, and configure the settings. Default Settings Fax settings can be enabled or disabled as needed to suit the needs of your workplace by clicking the [Default Settings] tab. Detection of Dial Tone This setting determines whether or not the machine verifies the presence of a dial tone on the line before starting transmission. Enabling this setting can ensure transmission to the correct destination, because the machine automatically verifies that there is a dial tone on the line before sending a fax. • If you find that your connection environment is not capable of transmission when this setting is enabled, disable the setting. • When the function is disabled, there is a slight possibility that a wrong number may be dialed due to the initial digit of the number becoming lost during dialing. Dial Mode Setting Select the appropriate setting for your telephone line type. Dial Mode Setting Select the line type from the list. Auto Select Select this after the line has been connected to have the machine automatically detect whether your line is a pulse dial line or a tone dial line. Auto Wake Up Print When the [POWER] key ( ) is "off" (but the main power switch is "on") and a fax is received, this function automatically activates the machine and prints the fax. When this function is disabled, received faxes are not printed until the [POWER] key ( ) is switched "on". Pause Time Setting Use this to change the length of pauses inserted in fax numbers. If a hyphen "-" is entered when dialing or storing a fax number, a pause of 2 seconds is inserted. The pause can be changed to any number of seconds from 1 to 15. Fax Dest. Confirmation Mode This setting specifies whether or not a destination verification message is displayed when sending a fax in order to prevent accidental transmission to the wrong destination. Speaker Settings Use these settings to set the sound heard from the speaker for the Speaker, Ringer Volume, Line Monitor, Fax Receive Complete Signal, Fax Send Complete Signal, and Fax Communication Error Signal. For the Fax Receive Complete Signal, the Fax Send Complete Signal, and the Fax Communication Error Signal, the Tone Pattern and Transmission Complete Sound Time Setting can be selected in addition to the volume. Remote Reception Number Setting Fax reception can be activated from an extension phone connected to the machine by entering a 1-digit number and pressing the key twice on the phone's keypad. This number is called the remote reception number, and you can set it to any number from "0" to "9". 6-111 Contents