Sharp DX-C310FX DX-C310 DX-C3400 Operation Manual - Page 122

COPIER Selecting single color copying When [Single Color] is selected for the color mode, the following screen appears. Select the desired color. Selecting 2 color copying When [2 Color] is selected for the color mode, the following screen appears. Select the desired color. • When auto mode is used, there may be some originals for which switching between color and black & white does not take place correctly. In this event, press the [COLOR START] key or the [BLACK & WHITE START] key as appropriate to manually switch between color and black & white. • Copying takes place in black & white when the [BLACK & WHITE START] key is pressed, regardless of the color mode setting. System Settings (Administrator): Initial Status Settings (Color Mode) This is used to change the default color mode setting. System Settings (Administrator): Detect Standard in Auto Color Mode (Web page only) When the color mode is set to auto, the discrimination point for detecting whether originals are color or black and white can be set to one of 5 levels. 2-22 Contents