Sharp DX-C310FX DX-C310 DX-C3400 Operation Manual - Page 597

SYSTEM SETTINGS Settings of each tray WEB PAGE (GENERAL) The following settings can be configured. Item Description Type Select the type of paper that is loaded in the tray. The paper types that can be selected vary by paper tray. For more information, see "Tray Settings" (page 6-50). To store a new paper type, see "Paper Type Registration" (page 6-51). Select the paper size from the list. The paper sizes that can be selected vary by tray. The sizes that can be selected may also be restricted by the paper type selected above. For more information, see "Tray Settings" (page 6-50). Size If the desired size does not appear in the list, select [Custom Size] and directly enter the size (only for the bypass tray). For more information, see "Tray Settings" (page 6-50). Feeding Approved Job Select the modes that can be used. If there is a function that you do not wish to be used with the selected tray, disable the function. When the "Type" is other than plain paper, recycled paper, colored paper, or a user type, [Fax] and [Internet Fax] cannot be selected. • If the paper size specified here is different from the size of paper that is loaded in a tray, a problem or misfeed may result when printing. To change the paper size in a tray, see "1. BEFORE USING THE MACHINE". • Paper properties such as "Fixed Paper Side" are automatically set when the paper type is selected. The paper tray properties cannot be changed in this screen. • If "Disabling of Tray Settings" (page 6-72) has been enabled in the system settings (administrator), the tray settings (except for the bypass tray) cannot be configured. 6-49 Contents