Sharp DX-C310FX DX-C310 DX-C3400 Operation Manual - Page 408

FACSIMILE Keys in the display can be selected with the arrow keys and the [OK] key. Place the original. 1 Place the original face up in the document feeder tray, or face down on the document glass. When the original is a different size than the size setting, set the original size. ☞ SPECIFYING THE SCAN SIZE AND SEND SIZE (page 4-50) AAA AAA CCC CCC EEE EEE GGG GGG III III (2) (3),(5) BBB BBB DDD DDD FFF FFF HHH HHH JJJ JJJ BACK OK 2 Enter the destination fax number. (1) Select the [Address] key in the base screen. For the [Address] key, see "BASE SCREEN OF FAX MODE" (page 4-8). (2) Select the one-touch key of the desired destination. If the destination is not stored in the address book, enter the fax number with the numeric keys. If the sub-address and passcode are stored in the one-touch key, the following sub-steps are not necessary. Go to step 3. (3) Select the [Sub Address] key. "/" appears. (4) Enter the sub-address with the numeric keys. (5) Select the [Sub Address] key. "/" appears. (6) Enter the passcode with the numeric keys. If a passcode has been omitted in the memory box of the other machine, (5) and (6) are not necessary. Press the [BLACK & WHITE START] key. Scanning begins. • If you inserted the original pages in the document feeder tray, all pages are scanned. A beep will sound to indicate that scanning is finished. • If you are scanning the original on the document glass, scan each page one page at a time. 3 When scanning finishes, place the next original and press the [BLACK & WHITE START] key. Repeat until all pages have been scanned and then select the [Read-End] key. A beep will sound to indicate that scanning is finished. When the relay machine receives the fax, it will automatically transmit the fax to each of the end receiving machines programmed in the memory box. To cancel scanning... Press the [STOP] key ( ) while the original is being scanned. 4-115 Contents