Sharp DX-C310FX DX-C310 DX-C3400 Operation Manual - Page 197

COPIER ADJUSTING THE INTENSITY OF A COPY (Intensity) This is used to adjust the intensity (saturation) of color images. Weakening the intensity Original Strengthening the intensity Keys in the display can be selected with the arrow keys and the [OK] key. Place the original. 1 Place the original face up in the document feeder tray, or face down on the document glass. After placing the original, specify the original size. ☞ ORIGINAL SIZES (page 2-28) Select the special modes. (1) Select the [Special Modes] key. 2 (2) Select the [Color Adjustments] key. (3) Select the [Intensity] key. ☞ [Color Adjustments] KEY (page 2-88) (1) 3 (2) BACK OK Adjust the intensity. (1) Adjust the intensity setting. To strengthen the intensity, select the [+] key and press the [OK] key. To weaken the intensity, select the [-] key and press the [OK] key. (2) Select the [Special Modes] key. You will return to the special modes screen. Press the [BACK] key to return to the base screen of copy mode. Press the [COLOR START] key. Copying will begin. If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you have selected sort 4 mode, change originals and press the [COLOR START] key. Repeat until all pages have been scanned and then select the [Read-End] key. To cancel scanning and copying... Press the [STOP] key ( ). This function cannot be used in combination with "Color Tone Enhancement" in the copy exposure settings. To cancel an intensity setting... Select the [Cancel] key in the screen of step 3. 2-97 Contents