Sharp DX-C310FX DX-C310 DX-C3400 Operation Manual - Page 332

FACSIMILE TRANSMISSION USING THE SPEAKER When the speaker is used to dial, the fax is sent after the number is dialed and the connection is established. If a person answers, you will be able to hear his or her voice, but you will not be able to speak. Keys in the display can be selected with the arrow keys and the [OK] key. Place the original. Place the original face up in the document feeder tray, or face down on the document glass. When the document glass is used, only one page can be 1 transmitted. When the original is a different size than the size setting, set the original size. ☞ SPECIFYING THE SCAN SIZE AND SEND SIZE (page 4-50) (2) (1) (3) 2 AAA AAA CCC CCC EEE EEE GGG GGG III III BBB BBB DDD DDD FFF FFF HHH HHH JJJ JJJ BACK OK BACK OK Enter the destination fax number. (1) Select the [Speaker] key. You will hear the dial tone through the machine's speaker. (2) Select the [Address] key in the base screen. (3) Select the one-touch key of the desired destination. A group key cannot be used. • In addition to specification by one-touch key, a destination can also be specified using a search number. You can also directly enter a fax number with the numeric keys or look up a destination in a global address book. For more information, see "ENTERING DESTINATIONS" (page 4-19). • After selecting the [Speaker] key and pressing the [OK] key, you can select the [Speaker Volume] key and press the [OK] key to adjust the volume of the speaker. The speaker volume changes each time the [OK] key is pressed with the [Speaker Volume] key selected. Adjust the volume to the desired level. Wait until the connection is made and then press the [BLACK & WHITE START] key. Transmission begins. 3 To cancel transmission... Select the [Speaker] key and press the [OK] key before the [BLACK & WHITE START] key is pressed. The line will be disconnected and transmission will stop. 4-39 Contents