Sharp DX-C310FX DX-C310 DX-C3400 Operation Manual - Page 627

SYSTEM SETTINGS WEB PAGE (ADMINISTRATOR) Image Send Settings Settings related to the image send function (scan, Internet fax, etc.) can be configured. For explanations of settings related to the fax function, see "FAX SYSTEM SETTINGS IN THE WEB PAGE" (page 6-106). Operation Settings The operation settings below apply to all image send functions. Select [System Settings] - [Image Send Settings] [Operation Settings] in the menu bar, and configure the settings. Default Settings Click the [Default Settings] tab and configure the settings. Default Display Settings You can select one of 5 base screen types for the base screen that appears when the [IMAGE SEND] key is pressed or when the [CLEAR ALL] ( ) key is pressed in image send mode. • Address Book • Scan • Internet Fax • Fax • Data Entry Hold settings for a while after scanning has been completed Use this setting to hold the settings after scanning is completed (until Auto Clear Mode activates). Switch Automatically to Copy Mode Screen Enable this setting to have the screen automatically switch to the copy mode screen if no action is taken in the image send mode screen for 20 seconds. Initial Resolution Setting The following settings are available for the default resolutions of scan, Internet fax, and fax mode. Scan : 100X100 dpi, 200X200 dpi, 300X300 dpi, 400X400 dpi, 600X600 dpi Internet fax : 200X100 dpi 200X200 dpi 200X400 dpi 400X400 dpi Half Tone 600X600 dpi Fax: Standard Fine Super Fine Half Tone Ultra Fine Default Exposure Settings This is used to set the default exposure settings for scanning a document in image send mode. Select [Auto] or [Manual]. When [Manual] is selected, the exposure can be set to one of 5 levels. Address Book Default Selection One of the following screens can be specified for the initial address book screen. Tab Switch • ABC • Group Address Type • All • E-mail • FTP/Desktop • Network Folder • Internet Fax (Including Direct SMTP) • Fax • Group 6-79 Contents