Sharp DX-C310FX DX-C310 DX-C3400 Operation Manual - Page 534

SCANNER/INTERNET FAX CHECKING THE IMAGE BEFORE PRINTING When "Received Data Image Check Setting" (Web page only) is enabled* in the system settings (administrator), you can check a received image in the display before printing it out. When this function is enabled, follow the steps below to print a received image. * The factory default setting is disabled. Keys in the display can be selected with the arrow keys and the [OK] key. BACK OK When an image is received, a confirmation prompt will appear. Select the [Yes] key. 1 If this message appears while you are configuring settings of any type and you select the [Yes] key, the settings that you are configuring will be canceled. If this message appears in another mode, you will return to the base screen of image send mode after checking the image. (1) 2 AAA AAA BBB BBB CCC CCC DDD DDD EEE EEE FFF FFF 04/04/2010 04/04/2010 04/04/2010 04/04/2010 04/04/2010 04/04/2010 (2) BACK OK Select the received image (1) Select the key of the received image that you want to check. Multiple received images can be checked. (2) Select the [Image Check] key. To delete an image that has been selected, select the [Delete] key. To print an image that has been selected, select the [Print] key. BACK OK Check the received image and then select the [Print] key. 3 Printing begins. For information on the image check screen, see "IMAGE CHECK SCREEN" (page 5-113). If the screen of step 1 appears when you are configuring settings in the setting screens of any of the modes, the configured settings will be canceled if you view the image. After viewing the image, you will return to the base screen of image send mode, regardless of which mode you were in previously. System Settings (Administrator): Received Data Image Check Setting (Web page only) Use this to specify whether or not a received Internet fax can be viewed before it is printed. 5-112 Contents