Sharp DX-C310FX DX-C310 DX-C3400 Operation Manual - Page 628

Default Original Image Type Select the original type beforehand to enable transmission at a resolution suitable for the original (only in scan mode and USB memory mode). The settings are shown below. • Text/Printed Photo • Text/Photo • Text • Photo • Printed Photo • Map • When the exposure is set to [Auto], a default original type cannot be selected. Moiré Reduction This reduces the moiré effect (line pattern) that occurs when printed matter is scanned (only in scan mode and USB memory mode). Must Input Next Address Key at Broadcast Setting This setting is used to require that the [Next Address] key be selected before the next address is entered when performing a broadcast transmission. When this setting is enabled, the [Next Address] key cannot be omitted even if the next address is entered with a one-touch key. If a user attempts to enter the next address without selecting the [Next Address] key, a double-beep alarm will sound and the entry will be rejected. Scan Complete Sound Setting The scan complete sound can be selected. The Number of File Name/Subject/Body Keys Displayed Setting Select 6, 12 or 18 for the number of file name/subject keys that are displayed in the screen. The Number of Direct Address Keys Displayed Setting Select 5, 10, or 15 for the number of one-touch keys that appear in the address book screen. SYSTEM SETTINGS WEB PAGE (ADMINISTRATOR) Disable Switching of Display Order This is used to prohibit changes to the order of display (search number order, ascending, descending) in the address book. When this setting enabled, selecting a tab on the address book screen does not change the order. The display order will remain fixed at the order that is in effect when this setting is enabled. Hold Setting for Received Data Print (When the Internet fax expansion kit or facsimile expansion kit is installed.) This function holds received faxes and Internet faxes in memory without printing them. The faxes can be printed by entering a password (factory default setting: 0000) with the numeric keys. Password When [Hold Setting for Received Data Print] is enabled, enter the password (4-digit number). These settings can only be configured when there is no received data in the machine's memory (excluding data in a confidential or relay broadcast memory box). Erase Width Adjustment This is used to set the default erase width for erase function. Specify a value from 0" (0 mm) to 1" (20 mm) in increments of 1/8" (1 mm) for edge erase. 6-80 Contents