Sharp DX-C310FX DX-C310 DX-C3400 Operation Manual - Page 575

SYSTEM SETTINGS OPERATION PANEL (ADMINISTRATOR) Operation Settings Settings related to machine operation can be configured. Select the [Operation Settings] key to configure the settings. Other Settings Keys Touch Sound This setting is used to adjust (or turn off) the volume of the beep that sounds when you select a key. Display Language Setting The language that appears in the display can be changed. When user authentication is enabled and a display language is specified in the favorite operation group, that setting is given priority. MFP Display Pattern Setting One of the six color patterns can be selected for the color pattern in the display. A sample of the selected pattern can be viewed. Device Control These settings control devices installed on the machine. Select the [Device Control] key to configure the settings. Other Settings Registration Adjustment If the colors are out of place on the printed surface when color printing is performed, the print positions of the colors can be adjusted. To perform this adjustment, select the [Auto Adjustment] key. A message will appear. select the [Execute] key. Fusing Cleaning Mode Use this function to clean the machine's fusing unit when dots or other dirt appear on the printed side of the paper. When this function is executed, a "V" is printed on both sides of the paper and the fusing unit is cleaned. • When "Disabling of Duplex" in web page is enabled (page 6-72), printing only takes place on one side of the cleaning sheet. • If improvement is not noticed after the first time you use the function, try executing the function again. • It is not possible to move to the job status screen while this function is operating. Optimization of a Hard Disk This function optimizes the hard drive of the machine by defragmenting data. If a job is in progress, a message will appear and optimization will not begin until the job is finished. During optimization, the following operations are not possible: • Web page access, reception of print data • Use of keys on the operation panel • Turning off the power with the main power switch of the machine. • Auto Power Shut-Off When optimization is completed, the machine will automatically restart. When the print hold (retention) function is frequently used and output of files seems somewhat slow, optimizing the hard drive may improve performance. 6-27 Contents