Sharp DX-C310FX DX-C310 DX-C3400 Operation Manual - Page 112

COPIER USING THE DOCUMENT GLASS TO MAKE COPIES (1-sided copy of a 1-sided original) To make a copy of a book or other thick original that cannot be scanned with the automatic document feeder, open the automatic document feeder and place the original on the document glass. This section explains how to make a copy (1-sided copy of a 1-sided original) using the document glass. Keys in the display can be selected with the arrow keys and the [OK] key. Open the automatic document feeder, place the original face down on the document glass, and then gently close the automatic document feeder. Portrait original 1 Landscape original A A Align the top edge of the original against the side of the document glass with the scale. Align the right side of the original against the side of the document glass with the scale. Document glass scale mark 5-1/2" x 8-1/2" (A5) B5 8-1/2" x 11" (A4) • The maximum original size that can be placed on the document glass is 8-1/2" x 11" (A4). • Align the middle of the original with the tip of the mark. • Place the original in the appropriate position for its size as shown above. • After placing the original, be sure to close the automatic document feeder. If left open, parts outside of the original will be copied black, causing excessive use of toner. BACK OK Select the [Original] key. 2 BACK OK Specify the original size. 3 When placing an AB size or non-standard size original, specify the original size as explained in "ORIGINAL SIZES" (page 2-28). 2-12 Contents