Sharp DX-C310FX DX-C310 DX-C3400 Operation Manual - Page 656

SYSTEM SETTINGS WEB PAGE - FAX (GENERAL) Item Description Items displayed when storing a relay broadcast memory box Recipients Select the end recipients of the relay broadcast. Select the recipients from the address book. • Direct Entry: An address that is not stored in the address book can be directly entered. Enter the address in the same way as when storing an address for a mode. • Address Review: This displays a list of the selected recipients. Addresses can be deleted from this list if needed. • When programming a new memory box, a sub-address that is already programmed for another box cannot be used. However, the same passcode can be used for more than one memory box. • A passcode can be omitted. • [ ] and [#] cannot be used in a sub-address. • Do not forget the Print PIN. Fax Data Receive/Forward This section explains settings for reception and forwarding. Select [System Settings] - [Fax Data Receive/Forward] from the menu bar and configure each setting. Fax Settings The following items appear when the "Fax Settings" are configured. Item Description Receive Setting Multiple Set Print Staple Set the fax reception method. • Auto Reception: When a call comes in, the machine rings and then automatically begins fax reception. • Manual Reception: This can be used when an existing extension phone is connected to the machine. Fax reception is begun by manual operation after answering on the extension phone. Specify whether or not two or more copies of received faxes will be printed. The number of copies is set in "Fax Output Settings", (page 6-115). Specify whether or not stapling is performed. (Only when a finisher is installed.) If "Hold Setting for Received Data Print" (page 6-35) is enabled, you will be prompted to enter a password. Enter the correct password with the numeric keys. 6-108 Contents