Sharp DX-C310FX DX-C310 DX-C3400 Operation Manual - Page 129
Specifying a non-standard original size
View all Sharp DX-C310FX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Specifying a non-standard original size Keys in the display can be selected with the arrow keys and the [OK] key. BACK OK Select the [Size Input] key. 1 COPIER (1) (2) Enter the original size. BACK OK (1) Enter the X (horizontal) dimension of the original. Select either of the keys with the keys and press the [OK] key repeatedly to change the number. • When the document glass is used, enter a number from 1" to 11-5/8" (25 mm to 297 mm). • When the automatic document feeder is used, enter a number from 3-1/2" to 14" (89 mm to 356 mm). (3) • When a number which is from 5-3/8" (139 mm) and less is entered in 2-Sided copy mode, an original cannot be scanned. • If the horizontal dimension of the original is less than 3-1/2" (89 mm), use the document glass. (2) Enter the Y (vertical) dimension of the 2 original. Select either of the keys with the keys and press the [OK] key repeatedly to change the number. • When the document glass is used, enter a number from 1" to 8-1/2" (25 mm to 216 mm). • When the automatic document feeder is used, enter a number from 4" to 8-1/2" (100 mm to 216 mm). • If the vertical dimension of the original is less than 4" (100 mm), use the document glass. (3) Select the [Basic Menu] key. You will return to the base screen. Make sure that the entered dimensions appear in the [Original] key. When a number from 11-3/4" to 14" (298 mm to 356 mm) to the X (horizontal) dimension and a number from 1" to 3-7/8" (25 mm to 99 mm) to the Y (vertical) dimension are entered at the same time, an original cannot be scanned. To cancel the size input... To cancel the size input, select the [Cancel] key. 2-29 Contents