Sharp DX-C310FX DX-C310 DX-C3400 Operation Manual - Page 379
Insert the next set of originals and press the [BLACK & WHITE START] key.
View all Sharp DX-C310FX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 379 highlights
(2) 3 FACSIMILE BACK OK Select job build mode. (1) Select the [Special Modes] key. ☞ SPECIAL MODES (page 4-69) (2) Set the [Job Build] checkbox to . (3) Select the [Basic Menu] key. (3) Press the [BLACK & WHITE START] key to scan the first set. 4 To cancel scanning... Press the [STOP] key ( ). Insert the next set of originals and press the [BLACK & WHITE START] key. Repeat this step until all originals have been scanned. 5 To cancel scanning... Press the [STOP] key ( ). All scanned data will be cleared. BACK OK Select the [Read-End] key. 6 • If no action is taken for one minute after the confirmation screen appears, scanning automatically ends and the transmission is reserved. • The [Configure] key can be selected to change the exposure, resolution, scan size, and send size for each original page scanned. • If the memory becomes full during scanning, a message will appear and the transmission will be canceled. • This function cannot be used in direct transmission mode or when the speaker is used to dial. To cancel Job Build.... Set the [Job Build] checkbox to in the screen of step 3. 4-86 Contents